EFISIENSI RANTAI PASOK DALAM INDUSTRI ROSTER BETON: PERBANDINGAN METODE ECONOMIC ORDER QUALITY DAN JUST-IN-TIME

Khoerun Nisa Safitri; Asrul Fole; Nurul Aini

doi:10.36352/jlis.v2i2.1190

Khoerun Nisa Safitri Universitas Ibnu Sina
Asrul Fole Universitas Muslim Indonesia
Nurul Aini Universitas Ibnu Sina

DOI: https://doi.org/10.36352/jlis.v2i2.1190

Keywords: EOQ, JIT, Biaya Persediaan Rantai Pasok, Roster Beton.

Abstract

This study aims to analyze supply chain efficiency in the concrete roster industry in Batam by comparing the Economic Order Quantity (EOQ) and Just-In-Time (JIT) methods with the conventional inventory approach. The main issue faced by the industry is the high total inventory cost due to suboptimal ordering frequency and significant storage expenses. The data used are actual production figures and raw material requirements throughout 2024. A quantitative approach was applied using EOQ and JIT calculations. The results show that the EOQ method generates an annual inventory cost of Rp7,595,000, which is significantly lower than that of the JIT method at Rp10,400,000 and the conventional method at Rp145,650,000. EOQ proves to be more efficient by optimizing order quantities and minimizing storage costs. In contrast, the JIT method effectively eliminates storage costs but increases ordering costs due to more frequent orders. This study recommends adopting the EOQ model as an efficient inventory management solution for medium-scale manufacturing industries. The findings are expected to serve as a reference for strategic decision-making in logistics and supply chain management.

Downloads

Download data is not yet available.

References

Ahmad, F., & Al-Faritsy, A. Z. (2024). Analisis Perbandingan Antara Metode Economic Order Quantity dan Just In Time Untuk Pengendalian Persediaan Pada PT CTI. Jurnal ARTI (Aplikasi Rancangan Teknik Industri), 19(2), 98–107. https://doi.org/10.52072/arti.v19i2.897

Azhari, F., & Dzikron, M. (2022). Pengendalian Kualitas Produk Roster Beton dengan Menerapkan Metode New Seven Tools dan Prinsip 5S Studi Kasus di CV Jaya Abadi. Bandung Conference Series: Industrial Engineering Science, 2(2), 292–301. https://doi.org/10.29313/bcsies.v2i2.3790

Bekti, M. A., & Herdiman, L. (2024). Analisis Persediaan Bahan NaOH Di Gudang III PT Petrokimia Gresik Dengan Metode Economic Order Quantity dan Just In Time. Talenta Conference Series: Energy and Engineering (EE), 7(1), 312–319. https://doi.org/10.32734/ee.v7i1.2203

Bharadwaj, N. K. (2024). Application of Optimization Techniques to Solve Inventory Problems. International Journal of Mathematics Trends and Technology, 70(8), 21–27. https://doi.org/10.14445/22315373/IJMTT-V70I8P103

Fole, A. (2023). Perancangan Strategi Mitigasi Risiko Pada Proses Bisnis CV. JAT Mengunakan Metode House of Risk. Journal of Industrial Engineering Innovation, 1(02), 54–64. https://doi.org/10.58227/jiei.v1i02.109

Fole, A., Herdianzah, Y., Astutik, W., & Kulsaputro, J. (2024). The Effect of Marketing Digitalization on the Performance and Sustainability of Culinary MSMEs in the New Normal Era. Proceeding of Research and Civil Society Desemination, 2(1), 375–386. https://doi.org/10.37476/presed.v2i1.81

Fole, A., Kulsaputro, J., Raodah, Erniyani, & Yanasim, N. (2024). Application of ABC and EOQ Methods to Improve Control of Patented Medicine Inventory at Pharmacy A. EPI International Journal of Engineering, 7(1), 5–15. https://doi.org/10.25042/epi-ije.022024.02

Fole, A., & Safitri, K. N. (2025). Transforming Small-Scale Garment Production: Lean Manufacturing and VSM Strategies for Enhanced Productivity in Makassar’s MSMEs. Journal of Industrial System Engineering and Management, 4(1), 1–11. https://doi.org/10.56882/jisem.v4i1.41

Fole, A., Safitri, K. N., & Aini, N. (2025). Evaluasi Strategi Green Manufacuring Dan Green Distribution Terhadap Peningkatan Kinerja Umkm Menggunakan Regresi Linier Dan Analisis SWOT. Jurnal Liga Ilmu Serantau, 2(1), 39–52. https://ojs3.lppm-uis.org/index.php/JLIS

Fole, A., Safutra, N. I., Alisyahbana, T., Almuhajirin, Y., & Safitri, K. N. (2024). Peningkatkan Efisiensi Rantai Pasok melalui Material Requirement Planning untuk Bahan Baku dalam Produksi Lemari: Studi Kasus CV. Indo Mebel. JT-IBSI: Jurnal Teknik Ibnu Sina, 9(01), 11–21. https://doi.org/10.36352/jt-ibsi.v9i01.792

Haekal, J. (2023). Inventory Analysis at the Inspection Services Division using Economic Order Quantity (EOQ) and Just in Time (JIT) Approach. International Journal of Scientific and Academic Research, 03(06), 01–10. https://doi.org/10.54756/IJSAR.2023.V3.6.1

Jannah, M., Ismiyah, E., & Negoro, Y. P. (2024). Analisis Pengendalian Persediaan Material Bogie-SCT pada PT. Barata Indonesia dengan Metode Economic Order Quantity (EOQ) dan Just In Time (JIT). JUSTI (Jurnal Sistem Dan Teknik Industri), 5(2), 125–134. https://doi.org/10.30587/justicb.v5i2.9381

Kisty, T. A. H., Safitri, E., Basriati, S., & Soleh, M. (2025). Application of Economic Production Quantity (EPQ) Method and Just in Time Method (JIT) in Bread Raw Material Inventory Control. Zeta - Math Journal, 10(1), 30–38. https://doi.org/10.31102/zeta.2025.10.1.30-38

Kulsaputro, J., Fole, A., Safitri, K. N., & Aini, N. (2025). The Role of Resilient Supply Chains in Enhancing Competitiveness and Performance of SMEs: A Case Study in the SMI Sector. Jurnal Serambi Engineering, 10(2), 13205–13211. https://jse.serambimekkah.id/index.php/jse/article/view/865

Kumaat, C. S. J., Thambas, A. H., & Malingkas, G. Y. (2025). Pengendalian Material Pada Proyek Konstruksi Dengan Menggunakan Metode EOQ (Economic Order Quantity), POQ (Periodic Order Quantity), JIT (Just In Time). Syntax Literate ; Jurnal Ilmiah Indonesia, 10(2), 1258–1275. https://doi.org/10.36418/syntax-literate.v10i2.31904

Lestari, F., & Rustandi. (2024). Penerapan Metode Economic Order Quantity dan Just in Time Guna Meningkatkan Optimasi Pengendalian Persediaan Produk. Jurnal Bisnisman : Riset Bisnis Dan Manajemen, 5(03), 44–64. https://doi.org/10.52005/bisnisman.v5i03.190

Meilani, E. P., & Azizah, F. N. (2023). Perbandingan Efektivitas Metode EOQ dan JIT dalam Pengelolaan Persediaan pada PT XYZ. STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 7(3), 276–282. https://doi.org/10.30998/string.v7i3.14585

Pacidda, D. F. H. D., Nusran, M., Herdianzah, Y., & Fole, A. (2024). Optimalisasi Efisiensi Rantai Pasokan: Studi Perbandingan Metode Economic Order Quantity (EOQ) Dan Just-In-Time (JIT) Di PT. SSC. https://jurnal.kolibi.org/index.php/scientica/article/view/4133

Pratama, F. M. F., Wahyudin, W., & Fauzan, S. N. (2022). Perbandingan Metode Economic Order Quantity dan Just In Time untuk Mengetahui Efisiensi Persediaan Bahan Baku di UMKM Roti Bolmond. Matrik : Jurnal Manajemen Dan Teknik Industri Produksi, 23(1), 47. https://doi.org/10.30587/matrik.v23i1.3757

Rafsanjani, A. A., Lamatinulu, Chairany, N., & Fole, A. (2024). Optimisasi Pengendalian Persediaan Spare Part Alat Berat Menggunakan Metode Continuous Review: Studi Kasus PT. Kasmar Tiar Raya di Kabupaten Kolaka Utara. Journal of Industrial Engineering Innovation, 2(01), 9–20. https://doi.org/10.58227/jiei.v2i01.120

Renny, A., & Safitri, W. (2023). Perbandingan Metode Economic Order Quantity dan Just in Time Pada UMKM Sopia Bangkit. JAMBURA, 6(1), 186–195. https://doi.org/10.37479/jimb.v6i1.19323

Safutra, N. I., Fole, A., Dahlan, M., Hafid, M. F., Ahmad, A., Herdianzah, Y., & Muhtada, A. (2024). Optimizing Raw Material Inventory Control for Aluminum Wardrobes Using the Material Requirements Planning (MRP) Method: A Case Study on Amal Jaya SME. Jurnal Sistem Teknik Industri, 26(2), 191–198. https://doi.org/10.32734/jsti.v26i2.15972

Sofina, A., Berman, E. T., & Rahman, A. Z. (2025). Analisis Metode Economic Order Quantity Dan Just In Time Pada Pengendalian Persediaan Pipa Di Perusahaan Xyz. Journal Industrial Engineering and Management (JUST-ME), 6(01), 26–34. https://doi.org/10.47398/justme.v6i01.101